Look Something





Cari Uang Di Internet Dengan Cara Mudah....
SilahKan Click Disini

Sabtu, 03 Januari 2009
The Dark Knight Grunge Wallpaper

A quick Photoshop tutorial on the making of a grunge-style TDK (The Dark Knight) wallpaper! Is anyone else here looking forward to this wicked film? :)

The Dark Knight Finished Photoshop Tutorial

(1680 x 1050 download)

Introduction

I’d like to point out that I was inspired to design this after seeing (and using) Louie Mantia’s The Dark Knight wallpaper, which you can find here. He also has tons of other amazing wallpapers that you can download in fullscreen or widescreen resolutions.

Obviously you know what we’ll be making in this tutorial, but you should know that you should at least have basic knowledge of Photoshop to follow completely through. We’ll be using a lot of the basics in Photoshop, including tools and layer-related stuff.

1. Making your Canvas

We need to start by making a new document in Photoshop. For this tutorial you should use the resolution that fits your screen - in my case 1680 x 1050! Bring some rulers onto your canvas in the center.

Select some appropriate colors then drag a radial gradient in the middle of your document.

Radial Gradient Screenshot

Colors used were #3d3b3c and #0e0d11.

2. Background Texture

Time to add a little detail to the background. Find and copy onto your canvas a nice, grungy texture. For this you can use paper, stone, abstract or whatever! A good place to start is CG Textures.

Start with a texture of some metal scratches. Copy it into your canvas, resize it then mess with the layer mode & opacity/fill. I tried Color Dodge with a fill of 30%.

Metal Scratches Texture Added

Get another texture, this time you can use something random. Again mess with the layer mode and opacity, use whatever comes out nice & to your liking.

Rusty Texture Added

(rusty metal texture added)

3. Bat Logo

Time to get a nice bat logo for our wallpaper. For this you might want to go to Google Images and search for a good-quality batman logo. Just remember, go for the new and much cooler batman logo, not the old corny one from the ’60s ;)

Since I’m no professional with the Pen Tool or Illustrator, I enlisted the help of my brother Simon in tracing the batman logo, and it came out perfectly:

Batman Logo Traced

If you want to download the batman logo used above, please feel free: Download Batman Logo PSD

Copy your bat logo onto the canvas and rasterize it (conver it to pixels). Now you may want to make a few duplicates of your original layer, just in case something goes wrong.

4. Metal Effect (Bat Logo)

Now we want to make our bat logo a bit more interesting. Do you have any ideas on how to do that? I personally had a great struggle with this part… but anyway, follow this and I’m sure we’ll come out with a decent metal effect ;)

Start by darkening up your logo a little bit (start with a base color of #878787). Now, head into the blending options for your bat layer and apply the following layer styles:

Remember: depending on what size document and logo you’re working with, you may need to tweak those settings. I now have a basic beveled effect:

Beveled Bat Logo (Layer Styles Added)

OK, not looking so great, yet!

Create a new layer (layer > new > layer) then merge this layer together with your logo layer, this will apply the layer styles to the pixels so we can start afresh. Find and get out the Burn Tool, set the settings to low (Midtones, 30%) and do a little bit of burning on the inside of the logo.

Light Burn Tool

Now, using the Dodge Tool with moderate settings (Highlights, 35%) do a little bit of dodge-work on the edges/corners of your logo.

Dodge Tool Corners

Get out the Burn Tool again, using the same settings as before, darken the middle area of your logo a little more.

Burn Tool Inside

Now it’s time for some more layer styles:

Again, depending on what sizes you’re working with here, you may need to alter the inner shadow/inner glow settings.

Layer Styles Applied

Not bad now! As done before, create a new layer then merge it with the layer applied with the layer styles. After this, darken up your logo a little more using the levels feature (ctrl+l).

Darkened using Levels

OK, we’re done for that part, but we want to add a little more metal to the logo (next step).

5. Metal Textures (Bat Logo)

Again, check out your texture resources and find some nice, rusty metal textures. To start with I used a ‘galvanized’ metal texture.

Copy your texture to the canvas, resize it then crop it to the bat logo pixels (using a layer mask).

Galvanized Metal Texture Cropped

Now, time to mess with some layer modes. For the first galvanized metal texture layer I used Color Dodge with 40% fill, then I duplicated this layer and changed the layer mode to Overlay and left the fill opacity intact.

Layer Mode Changes Made

Not really noticeable, hey? Anyway, to finish off I added one more texture on top, with a large rusty bit at the top:

Dirty Grunge Metal Texture

For this layer I used Linear Burn and 27% fill (please remember, all the textures used in this tutorial can be downloaded from CG Textures).

Rusty Metal Layer Mode Change

(click for larger version)

6. Finshing Effects for Bat Logo

OK, to finish off with the bat logo I think we should add a shadow and also one of those cool light rays in the background. For the shadow, simply apply an Outer Glow layer style to the main layer.

For the ‘cool light ray’ effect I was talking about, get one of your original bat logo layers (with one solid color) and apply Filter > Blur > Radial Blur with similar settings to these:

Radial Blur Filter Settings

Now we have a cool blur like this:

Radial Blur Effects

I think a good idea for a better effect would be to make the shape slightly bigger before apply radial blur, so it stands out on the sides a little bit more. Anyway, after you’re done with the radial blur, change the layer mode to Color Dodge and lower the fill if you think it necessary.

Layer Mode Changed

So, as you can see, on the left we have the final bat logo on top of the light ray in the background, and on the right is the final light ray with the layer mode changed.

Further Effects

As I write this I continue getting ideas to improve on the final product, but I can’t list them all! You should keep adding your own stuff to the outcome though, as you’ll always come across a better effect.

One idea is to create another light ray effect and place it on top of all the other layers, use a layer mode such as Overlay and erase away some of the inner area.

Additional Light Ray Effect

(additional light ray effect on the right, as explained above)

7. Additional Textures

If you want a much darker outcome, you should continue adding textures on top of the whole document (not just the shape or the background, but the whole thing) and continue playing with layer modes, fills, layer masks, etc.

Don’t forget the ole trusty but crusty brushes either!

The Dark Knight Finished Photoshop Tutorial

(more textures, more adjustment layers, etc.)

Thanks + PSD

Well, we’re done for this tutorial! I hope it was sufficient :) Just remember though, if there’s anything specific you needed help with, please leave a comment or download and dissect the PSD file!

Label:

posted by Make Some Better @ Sabtu, Januari 03, 2009  
0 Comments:
Posting Komentar
<< Home
 
Clock


Semarang Weather
Search
Google




Send a Greeting Card
Retrieving an E-Card?
Enter Card Pick-up ID below:
Get your Free E-cards
by bravenet.com
About Me

Name: Make Some Better
Home: Semarang, Indonesia, Indonesia
About Me: Manusia Hanya Bisa Berdoa dan Berusaha Namun Allah SWT yang menentukan
See my complete profile
Previous Post
Archives
Shoutbox

Page Rank
Visitor
Blog Bookmarks
oggix.com : <a href=http://oggix.com> Free Shoutbox & Complete Blog Tools</a>
Blog Bookmarks
Counter
Banner


KapanLagi.com Game



KapanLagi.com Face



KapanLagi.com



KapanLagi.com Image Hosting



KapanLagi.com Clubbing



KapanLagi.com Trailer


My Friends Banner

tutorial photoshop





Musik-Bank

pulsa murah
Powered by

BLOGGER

Free Shoutbox Technology Pioneer